Site Map and Downloadable Documents    

Polywrap Products     Additional Products     Contact Us

.008” LLDPE POLYWRAP

MATERIAL SAFETY DATA SHEET

SECTION 1:  IDENTIFICATION

SECTION 2:  PRODUCT AND COMPONENT DATA

Precautionary label statements:  If burned by contact with molten material, cool as quickly as possible with water and see a physician for treatment of burn.    Note to physicians: Burns should be treated as thermal burns. Product is a polymer of low toxicity; therefore, there is no urgent need to remove it from skin because of toxicity.

SECTION 3:  PHYSICAL DATA

Melting Range: 225-265 degrees Fahrenheit Density: (.920 +/- .001) Vapor Pressure: Negligible Vapor Density: Not Applicable Evaporation Rate: Not Applicable Solubility in Water: Insoluble

SECTION 4:  FIRE HAZARD DATA

Flash Point: Solid, greater than 600 degrees Fahrenheit ( Pensky-Martens Closed Cup) degrees Fahrenheit Extinguishing Agent: Water spray, dry chemical, CO2

SECTION 5:  TRANSPORTATION

Not Regulated by DOT

The information contained herein is furnished without warranty of any kind.  Users should consider this data supplement to other information gathered by them and must make independent determinations of suitability and completeness of information from all sources to assure proper use and disposal of these materials and the safety and health of customers and employees.

Repcor, Inc.   11518 N. Port Washington Rd.   PO Box 404   Mequon, WI  53092-0404

Phone:  262-241-5900    Fax:  262-241-5376

Email:  repcor@sbcglobal.net  

© Repcor, Inc. 2005    Last Revision:  February 2010