Site Map Polywrap Products

Polywrap Products Additional Products Contact Us

Repcor E-Z Tear Polywrap Tape

2” x 100’/Roll, 24 Rolls/Case

This high shear rubber adhesive tape was specifically designed as a universal abatement prep tape. E-Z Tear Polywrap Tape is highly conformable and will withstand the unusual conditions inherent to the installation of Polywrap over ductile iron pipe. Its shear strength allows it to stretch yet still provide excellent adhesion under extreme temperatures and humid conditions. Specially cut “pinked” edges assure fast, easy tears for quick application.

Material Safety Data Sheet (MSDS)

The tape manufacturer has prepared no formal Material Safety Data Sheet (MSDS) information for this product. It is not considered a hazardous substance under OSHA’s Hazard Communication Standard (29 CFR 1910.1200, as amended in the August 24, 1987 Federal Register).

To be considered a hazardous substance (requiring an MSDS), a product must have shown statistically significant evidence, based on at least one study conducted in accordance with established principles, that acute or chronic health effects may occur in exposed employees, and/or that the product presents an otherwise significant health hazard.

E-Z TEAR POLYWRAP TAPE USAGE ESTIMATE

Pipe Diameter	Polywrap Size	Estimated Tape
3” Through 8”	Up to 20”	1 Case per 12,000 Ft of Pipe
10” Through 12”	24” & 27”	1 Case per 10,000 Ft of Pipe
14” Through 16”	30” & 34”	1 Case per 6,000 Ft of Pipe
18” Through 30”	37” Through 67”	1 Case per 4,000 Ft of Pipe
36” & 42”	81”	1 Case per 2,000 Ft of Pipe
48” Through 64”	95” Through 121”	1 Case per 1,500 Ft of Pipe

Repcor, Inc. 11518 N. Port Washington Rd. PO Box 404 Mequon, WI 53092-0404

Phone: 262-241-5900 Fax: 262-241-5376

Email: repcor@sbcglobal.net